dmesg - Intel HD 2500 IVB GT1
[ T0] Linux version 6.11.8-1-default (geeko@buildhost) (gcc (SUSE Linux) 14.2.1 20241007 [revision 4af44f2cf7d281f3e4f3957efce10e8b2ccb2ad3], GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.43.1.20240828-2) #1 SMP PREEMPT_DYNAMIC Thu Nov 14 12:54:01 UTC 2024 (099023b)
[ T0] BIOS-provided physical RAM map:
[ T0] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ T0] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ T0] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ T0] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ T0] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ T0] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ T0] BIOS-e820: [mem 0x0000000040005000-0x00000000ca19bfff] usable
[ T0] BIOS-e820: [mem 0x00000000ca19c000-0x00000000ca1defff] ACPI NVS
[ T0] BIOS-e820: [mem 0x00000000ca1df000-0x00000000ca923fff] usable
[ T0] BIOS-e820: [mem 0x00000000ca924000-0x00000000cab35fff] reserved
[ T0] BIOS-e820: [mem 0x00000000cab36000-0x00000000d9df1fff] usable
[ T0] BIOS-e820: [mem 0x00000000d9df2000-0x00000000da5f3fff] reserved
[ T0] BIOS-e820: [mem 0x00000000da5f4000-0x00000000da603fff] ACPI data
[ T0] BIOS-e820: [mem 0x00000000da604000-0x00000000daa4dfff] ACPI NVS
[ T0] BIOS-e820: [mem 0x00000000daa4e000-0x00000000daffefff] reserved
[ T0] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ T0] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ T0] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ T0] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ T0] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ T0] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ T0] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ T0] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ T0] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable
[ T0] NX (Execute Disable) protection: active
[ T0] APIC: Static calls initialized
[ T0] e820: update [mem 0xc9cb0018-0xc9cc0057] usable ==> usable
[ T0] e820: update [mem 0xc9ca1018-0xc9caf057] usable ==> usable
[ T0] extended physical RAM map:
[ T0] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[ T0] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ T0] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ T0] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ T0] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[ T0] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ T0] reserve setup_data: [mem 0x0000000040005000-0x00000000c9ca1017] usable
[ T0] reserve setup_data: [mem 0x00000000c9ca1018-0x00000000c9caf057] usable
[ T0] reserve setup_data: [mem 0x00000000c9caf058-0x00000000c9cb0017] usable
[ T0] reserve setup_data: [mem 0x00000000c9cb0018-0x00000000c9cc0057] usable
[ T0] reserve setup_data: [mem 0x00000000c9cc0058-0x00000000ca19bfff] usable
[ T0] reserve setup_data: [mem 0x00000000ca19c000-0x00000000ca1defff] ACPI NVS
[ T0] reserve setup_data: [mem 0x00000000ca1df000-0x00000000ca923fff] usable
[ T0] reserve setup_data: [mem 0x00000000ca924000-0x00000000cab35fff] reserved
[ T0] reserve setup_data: [mem 0x00000000cab36000-0x00000000d9df1fff] usable
[ T0] reserve setup_data: [mem 0x00000000d9df2000-0x00000000da5f3fff] reserved
[ T0] reserve setup_data: [mem 0x00000000da5f4000-0x00000000da603fff] ACPI data
[ T0] reserve setup_data: [mem 0x00000000da604000-0x00000000daa4dfff] ACPI NVS
[ T0] reserve setup_data: [mem 0x00000000daa4e000-0x00000000daffefff] reserved
[ T0] reserve setup_data: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ T0] reserve setup_data: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ T0] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ T0] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ T0] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ T0] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ T0] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ T0] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ T0] reserve setup_data: [mem 0x0000000100000000-0x000000041f5fffff] usable
[ T0] efi: EFI v2.3.1 by American Megatrends
[ T0] efi: ESRT=0xdaf7e818 ACPI=0xda7b2000 ACPI 2.0=0xda7b2000 SMBIOS=0xf04c0 MOKvar=0xdaee2000
[ T0] efi: Remove mem67: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[ T0] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[ T0] efi: Not removing mem68: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ T0] efi: Not removing mem69: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map
[ T0] efi: Not removing mem70: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map
[ T0] efi: Not removing mem71: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ T0] efi: Remove mem72: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ T0] e820: remove [mem 0xff000000-0xffffffff] reserved
[ T0] secureboot: Secure boot disabled
[ T0] SMBIOS 2.7 present.
[ T0] DMI: To be filled by O.E.M. To be filled by O.E.M./B75, BIOS 4.6.5 09/23/2022
[ T0] DMI: Memory slots populated: 2/4
[ T0] tsc: Fast TSC calibration using PIT
[ T0] tsc: Detected 3192.996 MHz processor
[ T0] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ T0] e820: remove [mem 0x000a0000-0x000fffff] usable
[ T0] last_pfn = 0x41f600 max_arch_pfn = 0x400000000
[ T0] MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs
[ T0] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ T0] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ T0] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ T0] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff]
[ T0] esrt: Reserving ESRT space from 0x00000000daf7e818 to 0x00000000daf7e850.
[ T0] secureboot: Secure boot disabled
[ T0] RAMDISK: [mem 0x7be40000-0x7dafdfff]
[ T0] ACPI: Early table checksum verification disabled
[ T0] ACPI: RSDP 0x00000000DA7B2000 000024 (v02 ALASKA)
[ T0] ACPI: XSDT 0x00000000DA7B2080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ T0] ACPI: FACP 0x00000000DA7BAE78 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ T0] ACPI: DSDT 0x00000000DA7B21A0 008CD1 (v02 ALASKA A M I 00000501 INTL 20051117)
[ T0] ACPI: FACS 0x00000000DAA4C080 000040
[ T0] ACPI: APIC 0x00000000DA7BAF88 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ T0] ACPI: FPDT 0x00000000DA7BB000 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ T0] ACPI: ASF! 0x00000000DA7BB048 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ T0] ACPI: MCFG 0x00000000DA7BB0F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ T0] ACPI: HPET 0x00000000DA7BB130 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ T0] ACPI: SSDT 0x00000000DA7BB168 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ T0] ACPI: SSDT 0x00000000DA7BB4D8 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ T0] ACPI: SSDT 0x00000000DA7BBE88 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ T0] ACPI: SSDT 0x00000000DA7BC9B0 0002D7 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ T0] ACPI: SSDT 0x00000000DA7BCC88 000348 (v01 PmRef ApTst 00003000 INTL 20051117)
[ T0] ACPI: DMAR 0x00000000DA7BCFD0 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ T0] ACPI: Reserving FACP table memory at [mem 0xda7bae78-0xda7baf83]
[ T0] ACPI: Reserving DSDT table memory at [mem 0xda7b21a0-0xda7bae70]
[ T0] ACPI: Reserving FACS table memory at [mem 0xdaa4c080-0xdaa4c0bf]
[ T0] ACPI: Reserving APIC table memory at [mem 0xda7baf88-0xda7baff9]
[ T0] ACPI: Reserving FPDT table memory at [mem 0xda7bb000-0xda7bb043]
[ T0] ACPI: Reserving ASF! table memory at [mem 0xda7bb048-0xda7bb0ec]
[ T0] ACPI: Reserving MCFG table memory at [mem 0xda7bb0f0-0xda7bb12b]
[ T0] ACPI: Reserving HPET table memory at [mem 0xda7bb130-0xda7bb167]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xda7bb168-0xda7bb4d4]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xda7bb4d8-0xda7bbe81]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xda7bbe88-0xda7bc9a9]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xda7bc9b0-0xda7bcc86]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xda7bcc88-0xda7bcfcf]
[ T0] ACPI: Reserving DMAR table memory at [mem 0xda7bcfd0-0xda7bd087]
[ T0] No NUMA configuration found
[ T0] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff]
[ T0] NODE_DATA(0) allocated [mem 0x41f5ca000-0x41f5f4fff]
[ T0] Zone ranges:
[ T0] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ T0] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ T0] Normal [mem 0x0000000100000000-0x000000041f5fffff]
[ T0] Device empty
[ T0] Movable zone start for each node
[ T0] Early memory node ranges
[ T0] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ T0] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ T0] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ T0] node 0: [mem 0x0000000040005000-0x00000000ca19bfff]
[ T0] node 0: [mem 0x00000000ca1df000-0x00000000ca923fff]
[ T0] node 0: [mem 0x00000000cab36000-0x00000000d9df1fff]
[ T0] node 0: [mem 0x00000000dafff000-0x00000000daffffff]
[ T0] node 0: [mem 0x0000000100000000-0x000000041f5fffff]
[ T0] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f5fffff]
[ T0] On node 0, zone DMA: 1 pages in unavailable ranges
[ T0] On node 0, zone DMA: 97 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 512 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 1 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 67 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 530 pages in unavailable ranges
[ T0] On node 0, zone DMA32: 4621 pages in unavailable ranges
[ T0] On node 0, zone Normal: 20480 pages in unavailable ranges
[ T0] On node 0, zone Normal: 2560 pages in unavailable ranges
[ T0] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[ T0] ACPI: PM-Timer IO Port: 0x408
[ T0] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ T0] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ T0] ACPI: Using ACPI (MADT) for SMP configuration information
[ T0] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ T0] TSC deadline timer available
[ T0] CPU topo: Max. logical packages: 1
[ T0] CPU topo: Max. logical dies: 1
[ T0] CPU topo: Max. dies per package: 1
[ T0] CPU topo: Max. threads per core: 1
[ T0] CPU topo: Num. cores per package: 4
[ T0] CPU topo: Num. threads per package: 4
[ T0] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ T0] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xc9ca1000-0xc9ca1fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xc9caf000-0xc9caffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xc9cb0000-0xc9cb0fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xc9cc0000-0xc9cc0fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xca19c000-0xca1defff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xca924000-0xcab35fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xd9df2000-0xda5f3fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xda5f4000-0xda603fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xda604000-0xdaa4dfff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xdaa4e000-0xdaffefff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xfebfffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ T0] [mem 0xdfa00000-0xfebfffff] available for PCI devices
[ T0] Booting paravirtualized kernel on bare hardware
[ T0] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ T0] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ T0] percpu: Embedded 72 pages/cpu s258048 r8192 d28672 u524288
[ T0] pcpu-alloc: s258048 r8192 d28672 u524288 alloc=1*2097152
[ T0] pcpu-alloc: [0] 0 1 2 3
[ T0] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.11.8-1-default splash=silent", will be passed to user space.
[ T0] random: crng init done
[ T0] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ T0] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ T0] Fallback order for Node 0: 0
[ T0] Built 1 zonelists, mobility grouping on. Total pages: 4165435
[ T0] Policy zone: Normal
[ T0] mem auto-init: stack:off, heap alloc:off, heap free:off
[ T0] software IO TLB: area num 4.
[ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ T0] Kernel/User page tables isolation: enabled
[ T0] ftrace: allocating 48161 entries in 189 pages
[ T0] ftrace: allocated 189 pages with 6 groups
[ T0] Dynamic Preempt: voluntary
[ T0] rcu: Preemptible hierarchical RCU implementation.
[ T0] rcu: RCU event tracing is enabled.
[ T0] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ T0] Trampoline variant of Tasks RCU enabled.
[ T0] Rude variant of Tasks RCU enabled.
[ T0] Tracing variant of Tasks RCU enabled.
[ T0] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ T0] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ T0] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ T0] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ T0] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ T0] Console: colour dummy device 80x25
[ T0] printk: legacy console [tty0] enabled
[ T0] ACPI: Core revision 20240322
[ T0] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ T0] APIC: Switch to symmetric I/O mode setup
[ T0] DMAR: Host address width 36
[ T0] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ T0] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ T0] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ T0] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ T0] DMAR: RMRR base: 0x000000daea4000 end: 0x000000daeb2fff
[ T0] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ T0] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ T0] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ T0] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ T0] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ T0] x2apic enabled
[ T0] APIC: Switched APIC routing to: cluster x2apic
[ T0] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ T0] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e067194724, max_idle_ns: 440795356678 ns
[ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 6388.07 BogoMIPS (lpj=10643320)
[ T0] CPU0: Thermal monitoring enabled (TM1)
[ T0] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ T0] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ T0] process: using mwait in idle threads
[ T0] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ T0] Spectre V2 : Mitigation: Retpolines
[ T0] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ T0] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ T0] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ T0] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ T0] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ T0] MDS: Mitigation: Clear CPU buffers
[ T0] MMIO Stale Data: Unknown: No mitigations
[ T0] SRBDS: Vulnerable: No microcode
[ T0] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ T0] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ T0] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ T0] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ T0] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ T0] Freeing SMP alternatives memory: 40K
[ T0] pid_max: default: 32768 minimum: 301
[ T0] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,bpf,ima,evm
[ T0] landlock: Up and running.
[ T0] Yama: becoming mindful.
[ T0] AppArmor: AppArmor initialized
[ T0] LSM support for eBPF active
[ T0] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ T0] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ T1] smpboot: CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ T1] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ T1] ... version: 3
[ T1] ... bit width: 48
[ T1] ... generic registers: 8
[ T1] ... value mask: 0000ffffffffffff
[ T1] ... max period: 00007fffffffffff
[ T1] ... fixed-purpose events: 3
[ T1] ... event mask: 00000007000000ff
[ T1] signal: max sigframe size: 1776
[ T1] Estimated ratio of average max frequency by base frequency (times 1024): 1088
[ T1] rcu: Hierarchical SRCU implementation.
[ T1] rcu: Max phase no-delay instances is 1000.
[ T1] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ T10] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ T1] smp: Bringing up secondary CPUs ...
[ T1] smpboot: x86: Booting SMP configuration:
[ T1] .... node #0, CPUs: #1 #2 #3
[ T1] smp: Brought up 1 node, 4 CPUs
[ T1] smpboot: Total of 4 processors activated (25554.30 BogoMIPS)
[ T41] node 0 deferred pages initialised in 24ms
[ T1] Memory: 16216672K/16661740K available (16384K kernel code, 3017K rwdata, 13216K rodata, 4292K init, 6176K bss, 433868K reserved, 0K cma-reserved)
[ T1] devtmpfs: initialized
[ T1] x86/mm: Memory block size: 128MB
[ T1] ACPI: PM: Registering ACPI NVS region [mem 0xca19c000-0xca1defff] (274432 bytes)
[ T1] ACPI: PM: Registering ACPI NVS region [mem 0xda604000-0xdaa4dfff] (4497408 bytes)
[ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ T1] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ T1] pinctrl core: initialized pinctrl subsystem
[ T1] PM: RTC time: 17:02:59, date: 2024-11-21
[ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ T1] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ T1] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ T1] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ T1] audit: initializing netlink subsys (disabled)
[ T47] audit: type=2000 audit(1732208579.073:1): state=initialized audit_enabled=0 res=1
[ T1] thermal_sys: Registered thermal governor 'fair_share'
[ T1] thermal_sys: Registered thermal governor 'bang_bang'
[ T1] thermal_sys: Registered thermal governor 'step_wise'
[ T1] thermal_sys: Registered thermal governor 'user_space'
[ T1] cpuidle: using governor ladder
[ T1] cpuidle: using governor menu
[ T1] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ T1] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ T1] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[ T1] PCI: Using configuration type 1 for base access
[ T1] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ T1] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ T1] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ T1] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ T1] ACPI: Added _OSI(Module Device)
[ T1] ACPI: Added _OSI(Processor Device)
[ T1] ACPI: Added _OSI(3.0 _SCP Extensions)
[ T1] ACPI: Added _OSI(Processor Aggregator Device)
[ T1] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ T1] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[ T1] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[ T1] ACPI: Dynamic OEM Table Load:
[ T1] ACPI: SSDT 0xFFFF9FFE40C87000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ T1] ACPI: Dynamic OEM Table Load:
[ T1] ACPI: SSDT 0xFFFF9FFE40BD8000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ T1] ACPI: Dynamic OEM Table Load:
[ T1] ACPI: SSDT 0xFFFF9FFE4142D800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ T1] ACPI: Interpreter enabled
[ T1] ACPI: PM: (supports S0 S1 S4 S5)
[ T1] ACPI: Using IOAPIC for interrupt routing
[ T1] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ T1] PCI: Using E820 reservations for host bridge windows
[ T1] ACPI: Enabled 14 GPEs in block 00 to 3F
[ T1] ACPI: \_TZ_.FN00: New power resource
[ T1] ACPI: \_TZ_.FN01: New power resource
[ T1] ACPI: \_TZ_.FN02: New power resource
[ T1] ACPI: \_TZ_.FN03: New power resource
[ T1] ACPI: \_TZ_.FN04: New power resource
[ T1] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ T1] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ T1] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ T1] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[ T1] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ T1] PCI host bridge to bus 0000:00
[ T1] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ T1] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0x41f600000-0x81f5fffff window]
[ T1] pci_bus 0000:00: root bus resource [bus 00-3e]
[ T1] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 conventional PCI endpoint
[ T1] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 conventional PCI endpoint
[ T1] pci 0000:00:02.0: BAR 0 [mem 0xf7800000-0xf7bfffff 64bit]
[ T1] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ T1] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ T1] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ T1] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 conventional PCI endpoint
[ T1] pci 0000:00:14.0: BAR 0 [mem 0xf7d00000-0xf7d0ffff 64bit]
[ T1] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ T1] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 conventional PCI endpoint
[ T1] pci 0000:00:1a.0: BAR 0 [mem 0xf7d12000-0xf7d123ff]
[ T1] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[ T1] pci 0000:00:1b.0: BAR 0 [mem 0x81f500000-0x81f503fff 64bit]
[ T1] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ T1] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ T1] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ T1] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ T1] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 conventional PCI endpoint
[ T1] pci 0000:00:1d.0: BAR 0 [mem 0xf7d11000-0xf7d113ff]
[ T1] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge
[ T1] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ T1] pci 0000:00:1f.0: [8086:1e48] type 00 class 0x060100 conventional PCI endpoint
[ T1] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 conventional PCI endpoint
[ T1] pci 0000:00:1f.2: BAR 0 [io 0xf0b0-0xf0b7]
[ T1] pci 0000:00:1f.2: BAR 1 [io 0xf0a0-0xf0a3]
[ T1] pci 0000:00:1f.2: BAR 2 [io 0xf090-0xf097]
[ T1] pci 0000:00:1f.2: BAR 3 [io 0xf080-0xf083]
[ T1] pci 0000:00:1f.2: BAR 4 [io 0xf060-0xf07f]
[ T1] pci 0000:00:1f.2: BAR 5 [mem 0xf7d10000-0xf7d107ff]
[ T1] pci 0000:00:1f.2: PME# supported from D3hot
[ T1] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 conventional PCI endpoint
[ T1] pci 0000:00:1f.3: BAR 0 [mem 0x81f505000-0x81f5050ff 64bit]
[ T1] pci 0000:00:1f.3: BAR 4 [io 0xf040-0xf05f]
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ T1] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ T1] pci 0000:02:00.0: BAR 0 [io 0xe000-0xe0ff]
[ T1] pci 0000:02:00.0: BAR 2 [mem 0xf7c04000-0xf7c04fff 64bit]
[ T1] pci 0000:02:00.0: BAR 4 [mem 0xf7c00000-0xf7c03fff 64bit]
[ T1] pci 0000:02:00.0: supports D1 D2
[ T1] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ T1] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ T1] pci_bus 0000:03: extended config space not accessible
[ T1] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [mem 0x41f600000-0x81f5fffff window] (subtractive decode)
[ T1] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ T1] ACPI: PCI: Interrupt link LNKB configured for IRQ 5
[ T1] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ T1] ACPI: PCI: Interrupt link LNKD configured for IRQ 4
[ T1] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKE disabled
[ T1] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKF disabled
[ T1] ACPI: PCI: Interrupt link LNKG configured for IRQ 10
[ T1] ACPI: PCI: Interrupt link LNKH configured for IRQ 3
[ T1] iommu: Default domain type: Passthrough
[ T1] pps_core: LinuxPPS API ver. 1 registered
[ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ T1] PTP clock support registered
[ T1] EDAC MC: Ver: 3.0.0
[ T1] efivars: Registered efivars operations
[ T1] NetLabel: Initializing
[ T1] NetLabel: domain hash size = 128
[ T1] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ T1] NetLabel: unlabeled traffic allowed by default
[ T1] mctp: management component transport protocol core
[ T1] NET: Registered PF_MCTP protocol family
[ T1] PCI: Using ACPI for IRQ routing
[ T1] PCI: pci_cache_line_size set to 64 bytes
[ T1] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ T1] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ T1] e820: reserve RAM buffer [mem 0xc9ca1018-0xcbffffff]
[ T1] e820: reserve RAM buffer [mem 0xc9cb0018-0xcbffffff]
[ T1] e820: reserve RAM buffer [mem 0xca19c000-0xcbffffff]
[ T1] e820: reserve RAM buffer [mem 0xca924000-0xcbffffff]
[ T1] e820: reserve RAM buffer [mem 0xd9df2000-0xdbffffff]
[ T1] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ T1] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff]
[ T1] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ T1] pci 0000:00:02.0: vgaarb: bridge control possible
[ T1] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ T1] vgaarb: loaded
[ T1] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ T1] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ T1] clocksource: Switched to clocksource tsc-early
[ T1] VFS: Disk quotas dquot_6.6.0
[ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ T1] AppArmor: AppArmor Filesystem Enabled
[ T1] pnp: PnP ACPI init
[ T1] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ T1] system 00:01: [io 0x0680-0x069f] has been reserved
[ T1] system 00:01: [io 0x1000-0x100f] has been reserved
[ T1] system 00:01: [io 0xffff] has been reserved
[ T1] system 00:01: [io 0xffff] has been reserved
[ T1] system 00:01: [io 0x0400-0x0453] has been reserved
[ T1] system 00:01: [io 0x0458-0x047f] has been reserved
[ T1] system 00:01: [io 0x0500-0x057f] has been reserved
[ T1] system 00:01: [io 0x164e-0x164f] has been reserved
[ T1] system 00:03: [io 0x0454-0x0457] has been reserved
[ T1] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ T1] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ T1] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ T1] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ T1] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ T1] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ T1] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ T1] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ T1] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ T1] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ T1] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ T1] system 00:05: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ T1] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ T1] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ T1] pnp: PnP ACPI: found 7 devices
[ T1] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ T1] NET: Registered PF_INET protocol family
[ T1] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ T1] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ T1] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ T1] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ T1] TCP: Hash tables configured (established 131072 bind 65536)
[ T1] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ T1] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ T1] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ T1] NET: Registered PF_XDP protocol family
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ T1] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ T1] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ T1] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ T1] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ T1] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ T1] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ T1] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ T1] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[ T1] pci_bus 0000:00: resource 8 [mem 0x41f600000-0x81f5fffff window]
[ T1] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ T1] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ T1] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ T1] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ T1] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ T1] pci_bus 0000:03: resource 7 [mem 0xdfa00000-0xfeafffff window]
[ T1] pci_bus 0000:03: resource 8 [mem 0x41f600000-0x81f5fffff window]
[ T1] pci 0000:02:00.0: CLS mismatch (64 != 32), using 64 bytes
[ T1] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ T1] software IO TLB: mapped [mem 0x00000000c5ca1000-0x00000000c9ca1000] (64MB)
[ T11] Trying to unpack rootfs image as initramfs...
[ T1] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ T1] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ T1] RAPL PMU: hw unit of domain package 2^-16 Joules
[ T1] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ T1] Initialise system trusted keyrings
[ T1] Key type blacklist registered
[ T1] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ T1] zbud: loaded
[ T1] integrity: Platform Keyring initialized
[ T1] integrity: Machine keyring initialized
[ T1] Key type asymmetric registered
[ T1] Asymmetric key parser 'x509' registered
[ T11] Freeing initrd memory: 29432K
[ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ T1] io scheduler mq-deadline registered
[ T1] io scheduler kyber registered
[ T1] io scheduler bfq registered
[ T1] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ T1] Non-volatile memory driver v1.3
[ T1] Linux agpgart interface v0.103
[ T1] ACPI: bus type drm_connector registered
[ T1] i8042: PNP: No PS/2 controller found.
[ T1] mousedev: PS/2 mouse device common for all mice
[ T1] rtc_cmos 00:02: RTC can wake from S4
[ T1] rtc_cmos 00:02: registered as rtc0
[ T1] rtc_cmos 00:02: setting system clock to 2024-11-21T17:02:59 UTC (1732208579)
[ T1] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[ T1] intel_pstate: Intel P-state driver initializing
[ T1] ledtrig-cpu: registered to indicate activity on CPUs
[ T1] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[ T1] Console: switching to colour frame buffer device 100x37
[ T1] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ T1] hid: raw HID events driver (C) Jiri Kosina
[ T1] drop_monitor: Initializing network drop monitor service
[ T1] NET: Registered PF_INET6 protocol family
[ T1] Segment Routing with IPv6
[ T1] RPL Segment Routing with IPv6
[ T1] In-situ OAM (IOAM) with IPv6
[ T22] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ T1] microcode: Current revision: 0x00000021
[ T1] microcode: Updated early from: 0x00000017
[ T1] IPI shorthand broadcast: enabled
[ T1] sched_clock: Marking stable (326735732, 176140)->(330526064, -3614192)
[ T1] registered taskstats version 1
[ T1] Loading compiled-in X.509 certificates
[ T1] Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
[ T1] Demotion targets for Node 0: null
[ T1] page_owner is disabled
[ T1] Key type .fscrypt registered
[ T1] Key type fscrypt-provisioning registered
[ T1] Key type encrypted registered
[ T1] AppArmor: AppArmor sha256 policy hashing enabled
[ T1] ima: No TPM chip found, activating TPM-bypass!
[ T1] Loading compiled-in module X.509 certificates
[ T1] Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
[ T1] ima: Allocated hash algorithm: sha256
[ T1] ima: No architecture policies found
[ T1] evm: Initialising EVM extended attributes:
[ T1] evm: security.selinux
[ T1] evm: security.SMACK64 (disabled)
[ T1] evm: security.SMACK64EXEC (disabled)
[ T1] evm: security.SMACK64TRANSMUTE (disabled)
[ T1] evm: security.SMACK64MMAP (disabled)
[ T1] evm: security.apparmor
[ T1] evm: security.ima
[ T1] evm: security.capability
[ T1] evm: HMAC attrs: 0x1
[ T1] PM: Magic number: 0:375:37
[ T1] memory memory73: hash matches
[ T1] RAS: Correctable Errors collector initialized.
[ T1] clk: Disabling unused clocks
[ T1] PM: genpd: Disabling unused power domains
[ T1] Freeing unused decrypted memory: 2028K
[ T1] Freeing unused kernel image (initmem) memory: 4292K
[ T1] Write protecting the kernel read-only data: 30720k
[ T1] Freeing unused kernel image (rodata/data gap) memory: 1120K
[ T1] Run /init as init process
[ T1] with arguments:
[ T1] /init
[ T1] with environment:
[ T1] HOME=/
[ T1] TERM=linux
[ T1] BOOT_IMAGE=/boot/vmlinuz-6.11.8-1-default
[ T1] splash=silent
[ T1] systemd[1]: Successfully made /usr/ read-only.
[ T1] systemd[1]: systemd 256.7+suse.9.gc7671762b3 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ T1] systemd[1]: Detected architecture x86-64.
[ T1] systemd[1]: Running in initrd.
[ T1] systemd[1]: No hostname configured, using default hostname.
[ T1] systemd[1]: Hostname set to .
[ T1] systemd[1]: Initializing machine ID from random generator.
[ T1] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ T1] systemd[1]: Queued start job for default target Initrd Default Target.
[ T1] systemd[1]: Reached target Initrd /usr File System.
[ T1] systemd[1]: Reached target Slice Units.
[ T1] systemd[1]: Reached target Swaps.
[ T1] systemd[1]: Reached target Timer Units.
[ T1] systemd[1]: Listening on Journal Socket (/dev/log).
[ T1] systemd[1]: Listening on Journal Sockets.
[ T1] systemd[1]: Listening on udev Control Socket.
[ T1] systemd[1]: Listening on udev Kernel Socket.
[ T1] systemd[1]: Reached target Socket Units.
[ T1] systemd[1]: Starting Create List of Static Device Nodes...
[ T1] systemd[1]: Starting Journal Service...
[ T1] systemd[1]: Starting Load Kernel Modules...
[ T1] systemd[1]: Starting Virtual Console Setup...
[ T1] systemd[1]: Finished Create List of Static Device Nodes.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ T199] i2c_dev: i2c /dev entries driver
[ T1] systemd[1]: Finished Load Kernel Modules.
[ T198] systemd-journald[198]: Collecting audit messages is disabled.
[ T1] systemd[1]: Starting Apply Kernel Variables...
[ T1] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev...
[ T1] systemd[1]: Finished Apply Kernel Variables.
[ T1] systemd[1]: Finished Create Static Device Nodes in /dev.
[ T1] systemd[1]: Reached target Preparation for Local File Systems.
[ T1] systemd[1]: Reached target Local File Systems.
[ T1] systemd[1]: Started Journal Service.
[ T322] raid6: sse2x4 gen() 17632 MB/s
[ T322] raid6: sse2x2 gen() 17995 MB/s
[ T322] raid6: sse2x1 gen() 14485 MB/s
[ T322] raid6: using algorithm sse2x2 gen() 17995 MB/s
[ T222] tsc: Refined TSC clocksource calibration: 3192.747 MHz
[ T222] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0586cde62, max_idle_ns: 440795354967 ns
[ T322] raid6: .... xor() 10076 MB/s, rmw enabled
[ T322] raid6: using ssse3x2 recovery algorithm
[ T222] clocksource: Switched to clocksource tsc
[ T322] xor: automatically using best checksumming function avx
[ T322] Btrfs loaded, assert=on, zoned=yes, fsverity=yes
[ T352] ACPI: bus type USB registered
[ T352] usbcore: registered new interface driver usbfs
[ T352] usbcore: registered new interface driver hub
[ T352] usbcore: registered new device driver usb
[ T43] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ T43] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ T43] ehci-pci 0000:00:1a.0: debug port 2
[ T348] SCSI subsystem initialized
[ T43] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d12000
[ T43] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ T43] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ T43] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T43] usb usb1: Product: EHCI Host Controller
[ T43] usb usb1: Manufacturer: Linux 6.11.8-1-default ehci_hcd
[ T43] usb usb1: SerialNumber: 0000:00:1a.0
[ T43] hub 1-0:1.0: USB hub found
[ T43] hub 1-0:1.0: 2 ports detected
[ T11] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ T11] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ T11] ehci-pci 0000:00:1d.0: debug port 2
[ T353] cryptd: max_cpu_qlen set to 1000
[ T11] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d11000
[ T11] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ T11] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ T11] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T11] usb usb2: Product: EHCI Host Controller
[ T11] usb usb2: Manufacturer: Linux 6.11.8-1-default ehci_hcd
[ T11] usb usb2: SerialNumber: 0000:00:1d.0
[ T11] hub 2-0:1.0: USB hub found
[ T11] hub 2-0:1.0: 2 ports detected
[ T361] AES CTR mode by8 optimization enabled
[ T354] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ T354] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ T354] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ T348] alua: device handler registered
[ T354] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ T354] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ T354] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ T354] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ T354] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T354] usb usb3: Product: xHCI Host Controller
[ T354] usb usb3: Manufacturer: Linux 6.11.8-1-default xhci-hcd
[ T354] usb usb3: SerialNumber: 0000:00:14.0
[ T354] hub 3-0:1.0: USB hub found
[ T354] hub 3-0:1.0: 4 ports detected
[ T348] rdac: device handler registered
[ T354] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ T354] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T354] usb usb4: Product: xHCI Host Controller
[ T354] usb usb4: Manufacturer: Linux 6.11.8-1-default xhci-hcd
[ T354] usb usb4: SerialNumber: 0000:00:14.0
[ T354] hub 4-0:1.0: USB hub found
[ T354] hub 4-0:1.0: 4 ports detected
[ T348] emc: device handler registered
[ T348] libata version 3.00 loaded.
[ T348] ahci 0000:00:1f.2: version 3.0
[ T348] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode
[ T348] ahci 0000:00:1f.2: 2/6 ports implemented (port mask 0x3)
[ T348] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ T348] scsi host0: ahci
[ T348] scsi host1: ahci
[ T348] scsi host2: ahci
[ T348] scsi host3: ahci
[ T348] scsi host4: ahci
[ T348] scsi host5: ahci
[ T348] ata1: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10100 irq 29 lpm-pol 0
[ T348] ata2: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10180 irq 29 lpm-pol 0
[ T348] ata3: DUMMY
[ T348] ata4: DUMMY
[ T348] ata5: DUMMY
[ T348] ata6: DUMMY
[ T8] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ T222] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ T208] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ T421] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ T423] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ T423] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20240322/psargs-332)
[ T423] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20240322/psparse-529)
[ T423] ata2.00: ATA-9: HS-SSD-C100 120G, S0411A, max UDMA/133
[ T423] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ T421] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20240322/psargs-332)
[ T421] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20240322/psparse-529)
[ T423] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20240322/psargs-332)
[ T423] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20240322/psparse-529)
[ T423] ata2.00: configured for UDMA/133
[ T8] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ T8] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ T8] hub 1-1:1.0: USB hub found
[ T8] hub 1-1:1.0: 6 ports detected
[ T208] usb 3-1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.00
[ T208] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ T208] usb 3-1: Product: USB Receiver
[ T208] usb 3-1: Manufacturer: Logitech
[ T222] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ T222] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ T222] hub 2-1:1.0: USB hub found
[ T222] hub 2-1:1.0: 8 ports detected
[ T421] ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[ T421] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ T347] i915 0000:00:02.0: [drm] Found IVYBRIDGE (device ID 0152) display version 7.00
[ T362] usbcore: registered new interface driver usbhid
[ T362] usbhid: USB HID core driver
[ T421] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20240322/psargs-332)
[ T421] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20240322/psparse-529)
[ T421] ata1.00: configured for UDMA/133
[ T42] scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[ T42] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ T440] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ T440] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ T440] sd 0:0:0:0: [sda] Write Protect is off
[ T440] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ T440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ T11] scsi 1:0:0:0: Direct-Access ATA HS-SSD-C100 120G 1A PQ: 0 ANSI: 5
[ T440] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ T42] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ T42] sd 1:0:0:0: [sdb] Write Protect is off
[ T42] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ T42] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ T42] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ T11] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ T347] Console: switching to colour dummy device 80x25
[ T42] sdb: sdb1 sdb2 sdb3 sdb4
[ T42] sd 1:0:0:0: [sdb] Attached SCSI disk
[ T347] i915 0000:00:02.0: vgaarb: deactivate vga console
[ T347] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
[ T347] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ T347] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0
[ T440] sda: sda1 sda2 sda3
[ T440] sd 0:0:0:0: [sda] Attached SCSI disk
[ T362] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C534.0001/input/input1
[ T347] fbcon: i915drmfb (fb0) is primary device
[ T362] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ T362] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C534.0002/input/input2
[ T362] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C534.0002/input/input3
[ T347] Console: switching to colour frame buffer device 200x56
[ T362] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C534.0002/input/input4
[ T362] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ T347] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ T362] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ T362] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ C1] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
[ T27] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input7
[ C1] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[ T27] hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-1/input1:1
[ T27] input: Logitech Wireless Mouse PID:4022 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C534.0002/0003:046D:4022.0004/input/input12
[ T27] logitech-hidpp-device 0003:046D:4022.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4022] on usb-0000:00:14.0-1/input1:2
[ T346] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input13
[ T346] logitech-hidpp-device 0003:046D:4023.0003: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-1/input1:1
[ T513] BTRFS: device fsid b60fa4c4-4d3a-4277-975c-9632e21261de devid 1 transid 292 /dev/sda2 (8:2) scanned by mount (513)
[ T513] BTRFS info (device sda2): first mount of filesystem b60fa4c4-4d3a-4277-975c-9632e21261de
[ T513] BTRFS info (device sda2): using crc32c (crc32c-intel) checksum algorithm
[ T513] BTRFS info (device sda2): using free-space-tree
[ T198] systemd-journald[198]: Received SIGTERM from PID 1 (systemd).
[ T1] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
[ T1] systemd[1]: systemd 256.7+suse.9.gc7671762b3 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ T1] systemd[1]: Detected architecture x86-64.
[ T1] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ T1] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ T1] systemd[1]: run-credentials-systemd\x2djournald.service.mount: Deactivated successfully.
[ T1] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped Switch Root.
[ T1] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ T1] systemd[1]: Created slice CUPS Slice.
[ T1] systemd[1]: Created slice Slice /system/getty.
[ T1] systemd[1]: Created slice Slice /system/modprobe.
[ T1] systemd[1]: Created slice Slice /system/systemd-fsck.
[ T1] systemd[1]: Created slice User and Session Slice.
[ T1] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ T1] systemd[1]: Stopped target Switch Root.
[ T1] systemd[1]: Stopped target Initrd File Systems.
[ T1] systemd[1]: Stopped target Initrd Root File System.
[ T1] systemd[1]: Reached target Local Integrity Protected Volumes.
[ T1] systemd[1]: Reached target Remote File Systems.
[ T1] systemd[1]: Reached target Slice Units.
[ T1] systemd[1]: Reached target System Time Set.
[ T1] systemd[1]: Reached target Local Verity Protected Volumes.
[ T1] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ T1] systemd[1]: Listening on LVM2 poll daemon socket.
[ T1] systemd[1]: Listening on Process Core Dump Socket.
[ T1] systemd[1]: Listening on Credential Encryption/Decryption.
[ T1] systemd[1]: Listening on udev Control Socket.
[ T1] systemd[1]: Listening on udev Kernel Socket.
[ T1] systemd[1]: Mounting Huge Pages File System...
[ T1] systemd[1]: Mounting POSIX Message Queue File System...
[ T1] systemd[1]: Mounting Kernel Debug File System...
[ T1] systemd[1]: Mounting Kernel Trace File System...
[ T1] systemd[1]: Starting Create List of Static Device Nodes...
[ T1] systemd[1]: Starting Load Kernel Module configfs...
[ T1] systemd[1]: Starting Load Kernel Module dm_mod...
[ T1] systemd[1]: Starting Load Kernel Module drm...
[ T1] systemd[1]: Starting Load Kernel Module efi_pstore...
[ T1] systemd[1]: Starting Load Kernel Module fuse...
[ T1] systemd[1]: Starting Load Kernel Module loop...
[ T1] systemd[1]: plymouth-start.service: Deactivated successfully.
[ T1] systemd[1]: plymouth-start.service: Unit process 368 (plymouthd) remains running after unit stopped.
[ T1] systemd[1]: Stopped Show Plymouth Boot Screen.
[ T1] systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[ T1] systemd[1]: Reached target Local Encrypted Volumes.
[ T1] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped Plymouth switch root service.
[ T1] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped File System Check on Root Device.
[ T1] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ T1] systemd[1]: Starting Journal Service...
[ T1] systemd[1]: Starting Load Kernel Modules...
[ T1] systemd[1]: Starting Remount Root and Kernel File Systems...
[ T1] systemd[1]: Starting Load udev Rules from Credentials...
[ T1] systemd[1]: Starting Coldplug All udev Devices...
[ T1] systemd[1]: Finished Create List of Static Device Nodes.
[ T1] systemd[1]: [email protected]: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module drm.
[ T1] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module efi_pstore.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ T1] systemd[1]: Mounted Huge Pages File System.
[ T1] systemd[1]: Mounted POSIX Message Queue File System.
[ T1] systemd[1]: Mounted Kernel Debug File System.
[ T1] systemd[1]: Mounted Kernel Trace File System.
[ T571] systemd-journald[571]: Collecting audit messages is disabled.
[ T1] systemd[1]: Started Journal Service.
[ T570] loop: module loaded
[ T566] device-mapper: uevent: version 1.0.3
[ T566] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[ T569] fuse: init (API version 7.40)
[ T627] thermal LNXTHERM:00: registered as thermal_zone0
[ T627] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ T627] thermal LNXTHERM:01: registered as thermal_zone1
[ T627] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ T620] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input14
[ T620] ACPI: button: Power Button [PWRB]
[ T620] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15
[ T620] ACPI: button: Power Button [PWRF]
[ T625] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20240322/utaddress-204)
[ T625] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ T625] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240322/utaddress-204)
[ T625] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ T625] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240322/utaddress-204)
[ T625] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ T625] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240322/utaddress-204)
[ T625] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ T625] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ T632] EDAC ie31200: No ECC support
[ T636] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ T42] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ T42] i2c i2c-7: Successfully instantiated SPD at 0x50
[ T42] i2c i2c-7: Successfully instantiated SPD at 0x52
[ T627] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ T627] r8169 0000:02:00.0 eth0: RTL8168h/8111h, 00:e0:1c:94:40:3d, XID 541, IRQ 31
[ T627] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ T627] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ T619] iTCO_vendor_support: vendor-support=0
[ T619] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ T619] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ T621] at24 7-0050: supply vcc not found, using dummy regulator
[ T621] at24 7-0050: 256 byte spd EEPROM, read-only
[ T621] at24 7-0052: supply vcc not found, using dummy regulator
[ T621] at24 7-0052: 256 byte spd EEPROM, read-only
[ T626] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ T626] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ T626] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ T626] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ T626] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ T626] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ T626] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ T626] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ T626] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ T626] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ T626] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ T312] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ T312] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ T312] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ T312] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ T312] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ T312] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ T312] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ T22] intel_rapl_common: Found RAPL domain package
[ T22] intel_rapl_common: Found RAPL domain core
[ T22] intel_rapl_common: Found RAPL domain uncore
[ T22] intel_rapl_common: package-0:package:long_term locked by BIOS
[ T22] intel_rapl_common: package-0:package:short_term locked by BIOS
[ T745] Adding 2097152k swap on /dev/sda3. Priority:-2 extents:1 across:2097152k
[ T571] systemd-journald[571]: Received client request to flush runtime journal.
[ T47] audit: type=1400 audit(1732197794.897:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=782 comm="apparmor_parser"
[ T47] audit: type=1400 audit(1732197794.897:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=784 comm="apparmor_parser"
[ T47] audit: type=1400 audit(1732197794.897:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=783 comm="apparmor_parser"
[ T47] audit: type=1400 audit(1732197794.897:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=785 comm="apparmor_parser"
[ T47] audit: type=1400 audit(1732197794.907:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=788 comm="apparmor_parser"
[ T47] audit: type=1400 audit(1732197794.907:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=786 comm="apparmor_parser"
[ T47] audit: type=1400 audit(1732197794.907:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=789 comm="apparmor_parser"
[ T47] audit: type=1400 audit(1732197794.907:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=790 comm="apparmor_parser"
[ T47] audit: type=1400 audit(1732197794.907:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=791 comm="apparmor_parser"
[ T571] systemd-journald[571]: /var/log/journal/a8aec7574f8a4590a91cc9353d159809/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating.
[ T571] systemd-journald[571]: Rotating system journal.
[ T47] audit: type=1400 audit(1732197794.937:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=792 comm="apparmor_parser"
[ T1154] NET: Registered PF_QIPCRTR protocol family
[ T1093] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ T60] r8169 0000:02:00.0 enp2s0: Link is Down
[ T60] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[ T1439] NET: Registered PF_PACKET protocol family
[ T564] logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected.
[ T564] logitech-hidpp-device 0003:046D:4022.0004: HID++ 2.0 device connected.
[ T1093] r8169 0000:02:00.0 enp2s0: Link is Down
[ T3269] PM: Image not found (code -16)
[ T3269] PM: hibernation: hibernation entry
[ T3269] Filesystems sync: 0.236 seconds
[ T3269] Freezing user space processes
[ T3269] Freezing user space processes completed (elapsed 0.001 seconds)
[ T3269] OOM killer disabled.
[ T3269] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ T3269] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ T3269] PM: hibernation: Marking nosave pages: [mem 0x20000000-0x201fffff]
[ T3269] PM: hibernation: Marking nosave pages: [mem 0x40004000-0x40004fff]
[ T3269] PM: hibernation: Marking nosave pages: [mem 0xc9ca1000-0xc9ca1fff]
[ T3269] PM: hibernation: Marking nosave pages: [mem 0xc9caf000-0xc9cb0fff]
[ T3269] PM: hibernation: Marking nosave pages: [mem 0xc9cc0000-0xc9cc0fff]
[ T3269] PM: hibernation: Marking nosave pages: [mem 0xca19c000-0xca1defff]
[ T3269] PM: hibernation: Marking nosave pages: [mem 0xca924000-0xcab35fff]
[ T3269] PM: hibernation: Marking nosave pages: [mem 0xd9df2000-0xdaffefff]
[ T3269] PM: hibernation: Marking nosave pages: [mem 0xdb000000-0xffffffff]
[ T3269] PM: hibernation: Basic memory bitmaps created
[ T3269] PM: hibernation: Preallocating image memory
[ T3269] PM: hibernation: Allocated 1006058 pages for snapshot
[ T3269] PM: hibernation: Allocated 4024232 kbytes in 0.37 seconds (10876.30 MB/s)
[ T3269] Freezing remaining freezable tasks
[ T3269] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ T3269] printk: Suspending console(s) (use no_console_suspend to debug)
[ T3269] ACPI: PM: Preparing to enter system sleep state S4
[ T3269] ACPI: PM: Saving platform NVS memory
[ T3269] Disabling non-boot CPUs ...
[ T3269] smpboot: CPU 3 is now offline
[ T3269] smpboot: CPU 2 is now offline
[ T3269] smpboot: CPU 1 is now offline
[ T3269] PM: hibernation: Creating image:
[ T3269] PM: hibernation: Need to copy 986590 pages
[ T3269] PM: hibernation: Normal pages needed: 986590 + 1024, available pages: 3178433
[ T3269] ACPI: PM: Restoring platform NVS memory
[ T3269] Enabling non-boot CPUs ...
[ T3269] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ T3269] CPU1 is up
[ T3269] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ T3269] CPU2 is up
[ T3269] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ T3269] CPU3 is up
[ T3269] ACPI: PM: Waking up from system sleep state S4
[ T3609] usb usb1: root hub lost power or was reset
[ T3616] usb usb3: root hub lost power or was reset
[ T3602] usb usb2: root hub lost power or was reset
[ T3616] usb usb4: root hub lost power or was reset
[ T3639] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ T3624] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ T3633] usb 3-1: reset full-speed USB device number 2 using xhci_hcd
[ T421] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ T423] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ T421] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20240322/psargs-332)
[ T421] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20240322/psparse-529)
[ T423] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20240322/psargs-332)
[ T423] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20240322/psparse-529)
[ T501] sd 0:0:0:0: [sda] Starting disk
[ T421] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20240322/psargs-332)
[ T421] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20240322/psparse-529)
[ T421] ata1.00: configured for UDMA/133
[ T59] sd 1:0:0:0: [sdb] Starting disk
[ T423] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20240322/psargs-332)
[ T423] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20240322/psparse-529)
[ T423] ata2.00: configured for UDMA/133
[ T3269] PM: hibernation: Basic memory bitmaps freed
[ T3269] OOM killer enabled.
[ T3269] Restarting tasks ... done.
[ T3269] PM: hibernation: hibernation exit
[ T1093] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ T59] r8169 0000:02:00.0 enp2s0: Link is Down
[ T59] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[ T4003] process 'files/extra/geekbench6/geekbench_x86_64' started with executable stack
[ T3647] BTRFS info (device sda2): qgroup scan completed (inconsistency flag cleared)
[ C0] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
[ T6434] BTRFS info (device sda2): qgroup scan completed (inconsistency flag cleared)